
Which projector for a golf simulator, and where to mount it?
In many installations, a ceiling-mounted short-throw projector works best. However, before choosing a specific model, check the distance it requires to project an image of the appropriate width.
Short-throw projector – why is it popular in simulators?
A short-throw projector allows you to achieve a wide image from a shorter distance to the screen than many standard models. This is especially important in a home golf room where the room depth is limited.
However, the "short throw" designation alone is not enough to select a device. Two short-throw projectors may require different distances from the screen. Therefore, before purchasing, it is worth checking their projection ratio, or throw ratio.
How to calculate the projector distance from the screen?
If the projector uses the full width of the image in its native aspect ratio, you can apply a simple formula:
Image width × throw ratio = approximate distance from lens to screen
For example: for an image width of 3.5 m and a throw ratio of 0.8, we get:
3.5 m × 0.8 = approximately 2.8 m
This means that the lens should be located roughly 2.8 m from the screen. Remember that this is a preliminary calculation. If the image aspect ratio differs from the projector's native aspect ratio – for example, you are displaying a 4:3 image from a 16:9 projector – check the distance using the manufacturer's calculator.
Where to mount a projector for a golf simulator?
Most often, the projector is mounted to the ceiling. This solution frees up floor space and allows for convenient cable routing.
However, the exact mounting location depends on the screen, the projector optics, and the position of the hitting mat. The device should be located:
out of the club's reach during the entire swing;
in a spot that minimizes the risk of being struck by a ball;
in a position that allows the image to fill the screen;
so that the player does not obstruct the light beam or cast a large shadow;
away from elements with which it might collide, e.g., lighting or a ceiling-mounted launch monitor.
Before mounting the projector, it is worth checking the positioning during test swings – including with a driver. If the simulator will be used by both right- and left-handed players, both positions must be considered.
You can see an example of such an integration in our Golf HUB project, where a ceiling projector, screen, and measurement system form a single training station.
What else to look for when choosing a projector?
Brightness and ambient light
Projector brightness is selected based on the screen size and the amount of light in the room. Conditions in a darkened home room differ from those in a brightly lit golf studio.
As a general starting point, BenQ recommends 3000 lumens for some installations, noting that brighter interiors may require a more powerful device. For its setup, Trackman recommends a projector with over 5000 lumens. Therefore, there is no single value suitable for every project.
Screen aspect ratio
Projectors often have native aspect ratios of 16:9 or 16:10, whereas a screen in a golf room may be taller and closer to a 4:3 ratio.
If the aspect ratios differ, the image will not always fill the screen without leaving empty space or utilizing only a portion of the projector's sensor. It is worth checking this before purchasing – along with the computer and software settings.
Resolution
Full HD can be sufficient in a well-matched installation. A 4K projector provides a more detailed image, but it also requires an adequate computer, signal, and software configuration.
Pay attention to the projector's native resolution. The mention of 4K signal support does not automatically mean that every device displays the image in the same way.
Image adjustment capabilities
A useful feature is lens shift, an optical image shift that makes it easier to fit the image to the screen. The adjustment range depends on the model.
In turn, trapezoidal distortion correction, or keystone, helps correct the shape of the image when the projector is placed at an angle. However, it should not replace proper mounting – heavy correction can impact the effective resolution of the image.
Most common mistakes when choosing a projector
Most problems arise when the projector is purchased before the entire setup has been planned. It is especially important to avoid:
choosing a device without knowing the screen width and aspect ratio;
calculating distance based on the diagonal instead of the image width;
overlooking the player's position and the shadow cast during the swing;
mounting in a location vulnerable to contact with a club or ball;
comparing projectors solely based on price and lumen count.
Remember that the projector is only part of the installation. The screen, mat, computer, and launch monitor must create a coherent system. If you are also considering the choice of a tracking system, take a look at our comparison of home launch monitors: SkyTrak, Mevo+, and Uneekor.
A good image starts with design
The best projector for a golf simulator is one tailored to your screen, room, and playing style. Before purchasing, measure your space, establish the hitting area, and check the required throw distance. This will prevent a situation where good equipment does not fit the finished setup.
If you are planning your own golf studio, see how we design complete golf simulators, or contact us to discuss the possibilities for your space.
Bibliography
BenQ, Measure Ideal Screen Size and Distance for Your Golf Simulator.
BenQ, Golf Simulator Projector Placement: Mounting Options and Throw Ratio.
BenQ, Golf Simulator Lighting: Brightness, Ambient Control & Tips.
Trackman, Golf Simulator: Technical Specifications.
Epson, Projector Setup and Installation Options and Adjust the Image.
Manufacturers' materials should be referenced in relation to the specific device model and room configuration.

Level up your game
Let's meet
Design office:
1 Górnośląska St.,
00-443 Warsaw
Showroom:
Golf green - book an appointment
Chabrowa 2 St.,
62-053 Borkowice
Write
Email address


